Marshall Medeiros (roofbeech70)

52 V of traditional water electrolysis to 1.356 V to deliver 10 mA cm-2 with excellent stability for over 400 h, superior to almost recently reported catalysts. The high performances result from the synergistic effect between highly active and conductive metal nickel and nitride, and nanorods arrays grown on 3D substrate. This work demonstrates that this material holds encouraging potential in large-scale energy-saving H2 production and urea-related wastewater treatment. In this paper, dispersed Ag nanoparticles supported on UiO-66 derivative were prepared and the effect of Ag loading on the structure and performance of the catalysts for toluene oxidation were studied. The characteristics of the catalysts were studied by XRD, SEM, TEM, HRTEM, BET, ICP-OES, XPS, UV-vis and in situ DRIFTS. It was observed that UiO-66 structure of 2 wt% Ag catalyst (2Ag-U) was not damaged. When Ag loading was further increased to 10 wt% (10Ag-U), framework of UiO-66 collapsed and uniform Ag nanoparticles were dispersed on the surface of support. Further increasing Ag to 14 wt% (14Ag-U), large Ag nanoparticles were observed, and Ag species migrated to the bulk phase of the support, resulting in the decrease of surface Ag content. The 10Ag-U catalyst showed excellent catalytic performance due to higher lattice oxygen and surface Ag0 content. In addition, in situ DRIFTS analysis was used to explore toluene-catalyzed intermediates. It was found that toluene was converted to benzaldehyde and benzoic acid, eventually forming CO2 and H2O. Exploring the highly efficient and durable electrocatalysts for hydrogen evolution reaction (HER) is vitally necessary for sustainable energy conversion and storage system. Herein, we fabricate an interfacial engineered Rh-carbon nitride as advanced electrocatalysts for HER in the acidic and alkaline electrolytes. The interface between Rh nanocrystals and carbon nitride may adjust the electronic structure of Rh, which results in high activity for HER. The optimal Rh-carbon nitride shows low overpotential at current density of -10 mA·cm-2 and small Tafel slope (13 mV and 25.0 mV dec-1 in 0.5 M H2SO4, 46 mV and 42.0 mV dec-1 in 1.0 M KOH, respectively), which is superior to that of commercial Pt/C (21 mV and 28.5 mV dec-1 in 0.5 M H2SO4, 55 mV and 44.0 mV dec-1 in 1.0 M KOH, respectively). Importantly, this composite also exhibits long-term stability in 0.5 M H2SO4 and 1.0 M KOH. The excellent HER performances can be attribute to the interface between Rh and carbon nitride, which downshifts their d-band center positions, tuning the adsorption ability for hydrogen and accelerating the HER kinetics. This work may open up an efficient method to design metal/carbon hybrid for electrocatalysis. Triptolide Today when the quest of new lead molecules to supply the development pipeline is driving the course of drug discovery, endophytic fungi with their outstanding biosynthetic potential seem to be highly promising avenues for natural product scientists. However, challenges such as the production of inadequate quantities of compounds, the attenuation or loss of ability of endophytes to produce the compound of interest when grown in culture and the inability of fungal endophytes to express their full biosynthetic potential in laboratory conditions have been the major constraints. These have led to the application of small chemical elicitors that induce epigenetic changes in fungi to activate their silent gene clusters optimizing the amount of metabolites of interest or inducing the synthesis of hitherto undescribed compounds. In this respect small molecular weight compounds which are known to function as inhibitors of histone deacetylase (HDAC), DNA methyltransferase (DNMT) and proteasome have proven their efficacy in enhancing or inducing the production of specialized metabolites by fungi. Mor