Nissen Pearson (ricedaisy14)

BN-doped polycyclic aromatic hydrocarbons (PAHs) have attracted numerous attentions because of their fascinating optical and electronic properties. In this work, a series of electron-donor (amine)- and -acceptor (borane)-functionalized BN-doped polycyclic aromatic hydrocarbons were prepared to study the substituents' effect on the photophysical properties. 4-Octyl As a result, the compound with both donor and acceptor, BN, exhibits both local emission (LE) and charge-transfer emission (CT) in polar solvents. Especially, the CT emission with a longer wavelength revealed a lifetime as long as millisecond time scale at room temperature, indicating typical phosphorescence characteristics. Low-temperature photoluminescent (PL) spectroscopy and a theoretical study were conducted to help to interpret this phenomenon, and it turned out to be the lowering of the S1 energy level of BN which makes the intersystem crossing favorable. Furthermore, fluoride anion titration experiments exhibit the application potential of the dual-emission phenomenon of BN for ratiometric sensory materials.It is a major challenge to achieve fast charging and high reversible capacity in potassium ion storing carbons. Here, we synthesized sulfur-rich graphene nanoboxes (SGNs) by one-step chemical vapor deposition to deliver exceptional rate and cyclability performance as potassium ion battery and potassium ion capacitor (PIC) anodes. The SGN electrode exhibits a record reversible capacity of 516 mAh g-1 at 0.05 A g-1, record fast charge capacity of 223 mA h g-1 at 1 A g-1, and exceptional stability with 89% capacity retention after 1000 cycles. Additionally, the SGN-based PIC displays highly favorable Ragone chart characteristics 112 Wh kg-1at 505 W kg-1 and 28 Wh kg-1 at 14618 W kg-1 with 92% capacity retention after 6000 cycles. X-ray photoelectron spectroscopy analysis illustrates a charge storage sequence based primarily on reversible ion binding at the structural-chemical defects in the carbon and the reversible formation of K-S-C and K2S compounds. Transmission electron microscopy analysis demonstrates reversible dilation of graphene due to ion intercalation, which is a secondary source of capacity at low voltage. This intercalation mechanism is shown to be stable even at cycle 1000. Galvanostatic intermittent titration technique analysis yields diffusion coefficients from 10-10 to 10-12 cm2 s-1, an order of magnitude higher than S-free carbons. The direct electroanalytic/analytic comparison indicates that chemically bound sulfur increases the number of reversible ion bonding sites, promotes reaction-controlled over diffusion-controlled kinetics, and stabilizes the solid electrolyte interphase. It is also demonstrated that the initial Coulombic efficiency can be significantly improved by switching from a standard carbonate-based electrolyte to an ether-based one.Defective grain boundaries (GBs) and surface trap states are detrimental to the efficiency and stability of perovskite solar cells (PSCs). In this research, ionic liquid (IL) is used to control the defect states at the perovskite surface and GBs. The newly formed (EMIm) x MA1-xPb[(BF4) x I1-x]3 interlayer promotes secondary grain growth to diminish GBs; besides, EMIM+ and BF4- fill the vacancies of MA+ and I- and also passivate undercoordinated Pb2+ trap states. The newly formed interface largely reduces the nonradiative recombination, thus enhancing the solar-cell performance to 19.0% (AM 1.5, 1 sun) with higher photovoltage and fill factor than the control device. Due to the hydrophobicity of the (EMIm) x MA1-xPb[(BF4) x I1-x]3 interlayer, the unencapsulated device stability in 30 days is much better than the control device under relative humidity (RH) = 20%. This work highlights IL-induced secondary grain growth and a defect passivation method for efficient and stable PSCs.This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNA