Banks Lauritsen (drughelmet65)

In order to obtain bioactive bone-implant interfaces with enhanced osteogenic capacity, various approaches have been developed to modify surface physicochemical properties of bio-inert titanium and titanium alloys. One promising strategy involves fabricating highly ordered nanotubes (NT) on implant surfaces via electrochemical anodization. However, few studies have applied this technique to Ti-6Al-4V alloys most commonly adopted for the fabrication of osteo-integrated surfaces on orthopedic implants. In this study, we investigated the influence of electrolyte hydrodynamics to NT fabrication on Ti-6Al-4V in ethylene glycol based electrolyte and evaluated the osteogenic differentiation capacity of human mesenchymal stromal cells (hMSCs) on different diameter NT surfaces. Computational Fluid Dynamics (CFD) analysis was used to simulate electrolyte flow profiles under various stirring conditions (e.g. stirrer bar location and flow direction) and their correlation to NT formation. Polished Ti-6Al-4V disks (240 gripect to the electrolyte hydrodynamic effects to NT growth on Ti-6Al-4V alloys, demonstrating the feasibility of a one-step anodization process for generating uniform NT under optimal hydrodynamics. Optimized wavy micro-/nano-topography with Ø 39 nm NT stimulated osteogenic differentiation capacity of hMSCs on Ti-6Al-4V alloys and confirmed the potential application of anodization to improve osteo-integrative surfaces in orthopedic implants. Due to their low cost and possible green synthesis, high stability and resistance to photobleaching, graphene quantum dots (GQDs) can be considered as one of the class of carbon nanomaterials which may have great potential as an agent for photosensitized oxygen activation. In such a way, GQDs can be used as a theranostic agent in photodynamic therapy. In this work pristine GQDs, GQDs irradiated with gamma rays and GQDs doped with N and N, S atoms are produced using a simple, green approach. By using different techniques (AFM, HR-TEM, SEM-EDS, FTIR, XRD, PL and UV-Vis) we investigated structural and optical properties of the new types of GQDs. We showed that GQDs functionalized with thiourea (GQDs-TU) completely lost the ability to produce singlet oxygen (1O2) upon photoexcitation while functionalization with urea (GQDs-U) improves the capability of GQDs to produce 1O2 upon the same conditions. Thus, presented GQDs modification with urea seems like a promising approach for the production of the efficient photosensitizer. On the opposite, GQDs-TU are efficient OH quencher. Due to high singlet oxygen production and low cytotoxicity below 100 μg/mL against HeLa cells, GQDs-U is a good candidate as an agent in photodynamic therapy at this concentration. This study demonstrates the efficacy of collagen/tussah silk fibroin (Col/TSF) hybrid scaffolds loaded with bone mesenchymal stem cells (BMSCs) in skin repair. Collagen (Col) and tussah silk fibroin (TSF) were extracted from bovine tendons and tussah cocoons, respectively. Col/TSF scaffolds were obtained using a freeze-drying method and were characterised using fourier transform infrared spectroscopy, scanning electron microscopy, porosity, water retention, thermal stability, and biocompatibility. The results revealed that addition of TSF to scaffolds could enhance their moisturising ability and cell infiltration. The antibacterial properties of Col/TSF scaffolds loaded with antibiotics were also excellent. BMSCs cultured in contact with developed Col/TSF scaffolds showed increased cell adhesion, viability, and differentiation. An in vivo study on rats showed that the Col/TSF scaffold seeded with BMSCs was more conducive to wound healing compared to the Col/TSF scaffold alone. The present study suggests that Col/TSF scaffold seeded with BMSCs could be a promising candidate for skin tissue engineering, due to its excellent skin affinity, good air and water permeability, and improved wound healing potential. In tissue engineering, the us