Esbensen Bennett (cymbalsnow97)

The presence of a biomimetic HAP coating on titanium surface, which reduces the structural stiffness, is essential to improve implants biocompatibility and osteointegration. In this study, new citrate-HAP (cHAP) coatings were produced by a simple hydrothermal method on pure titanium (Ti) surface, without requiring any additional pretreatment on this metal surface. BL-918 clinical trial The formed cHAP coatings consisting of nanorod-like hydroxyapatite particles, conferred nanoroughness and wettability able to endow improved biological responses. Indeed, the presence of citrate species in the precipitate medium seems to be responsible for controlling the morphology of the new coatings. The presence of citrate groups on the surface of cHAP coatings, identified by chemical composition analysis, due to their implication in bone metabolism can additionally bring an add-value for bone implant applications. From a mechanical point of view, the Finite Element algorithm showing that cHAP coatings tend to decrease the mechanical stress at pure Ti, further favors these new coatings applicability. Overall, the simple and expedite strategy used to developed new biomimetic coatings of citrate-HAP resulted in improved physicochemical, morphological and mechanical properties of Ti, which can endeavor improved implantable materials in bone healing surgical procedures.The standard method of evaluating the lubricity of intermittent urinary catheters with coefficient of friction (CoF) testing is not physiologically relevant, while there is also a dearth of published research on catheter-associated urethral micro-trauma. We developed a novel human urethral epithelial cell-seeded model of the urethra to replace the rubber counter-surface used in standard CoF testing. This cell-seeded model, in conjunction with a novel testing device, allows an investigation of catheter-associated epithelial micro-trauma in vitro for the first time. The CoF of four brands of commercially-available hydrophilic-coated intermittent catheters was measured using both the rubber and urethral model counter-surfaces. Post-catheterisation of the urethral model, the damage to the epithelial layer was analysed using standard cell imaging. The rubber counter-surface was shown to over-estimate the CoF of gel-coated catheters compared to our urethral model due to stick-slip behaviour caused by polymer-on-polymer interaction of the catheter base material on the rubber counter-surface. We identified no deleterious effect due to the presence or design of catheter eyelets to either the CoF measurements or the degree of epithelium damage in our model. Furthermore, the epithelial damage did not correlate with the measured CoF of the low friction catheters, suggesting a more nuanced pathogenesis of urethral irritation and casting doubt on the translatability of a solely mechanical assessment of lubricity of urinary catheters to a clinical effect.Bone cutting with high efficiency as well as low levels of forces and damage has a great significance for orthopaedic surgeries. Due to the brittleness and anisotropy of cortical bone, a conventional cutting process can cause irregular crack propagation and fractured bone chip, affecting the tissue removal process and postoperative recovery. In this paper, a high-frequency impact cutting method is investigated, and its effect on fracture propagation, chip formation and cutting forces is studied for orthogonal cutting. Experimental results show that cracks are deflected by cement lines in conventional cutting, forming fractured blocks or split chips. In impact cutting, the cutting-induced fractures expand along a main shear direction, generating small pieces of triangular segmented chips. Cutting forces are significantly reduced with vibration-induced impacts; especially, the main cutting force is nearly 70% lower than that in the conventional cutting. The main reason for this is much higher strain rates in high-frequency impact cutting than