Thompson Damgaard (beadstop1)

genes (Rvi5, Rvi6, Rvi8, Rvi11, Rvi14 and Rvi17). Transcriptome analysis confirmed enhanced resistance to apple scab of 'Free Redstar' tetraploids since the expression levels of genes related to resistance were strongly enhanced in tetraploids compared to their diploid counterparts.Silk fibroin (SF)-based materials are exposed to both natural and artificial ultraviolet (UV) light during preparation or administration. However, the effects of UV irradiation on SF films prepared under different conditions have not yet been described in detail. In this study, four SF films with different molecular weight (MW) distribution were fabricated using SF solutions, which were prepared by dissolving degummed SF for 0.5-24 h. We observed UV (365 nm) irradiation on SF films induced the increase of yellowness and absorbance at 310 nm of SF films, indicating the formation of new photo-products and di-tyrosine bonds by photo-oxidation. Due to di-tyrosine cross-links between SF chains, UV-irradiated SF films were not fully dissociated in urea solution. In addition to formation of new products, UV reduced the crystallinity of SF films by breaking hydrogen bonds of β-sheet conformation. Unlike the UV-induced decomposition of physical interactions, UV did not affect the covalent bonds (i.e., peptide bonds). Bexotegrast Through these experiments, we could expect that SF with higher MW was more susceptible and SF with lower MW was more resistant to UV-induced photo-oxidation and photo-degradation. These results provide useful information about UV-induced aging of SF-based materials under natural sunlight and UV irradiating conditions.University campuses are normally constituted of large buildings responsible for high energy demand, and are also important as demonstration sites for new technologies and systems. This paper presents the results of achieving energy sustainability in a testbed composed of a set of four buildings that constitute the Telecommunications Engineering School of the Universidad Politécnica de Madrid. In the paper, after characterizing the consumption of university buildings for a complete year, different options to achieve more sustainable use of energy are presented, considering the integration of renewable generation sources, namely photovoltaic generation, and monitoring and controlling electricity demand. To ensure the implementation of the desired monitoring and control, an internet of things (IoT) platform based on wireless sensor network (WSN) infrastructure was designed and installed. Such a platform supports a smart system to control the heating, ventilation, and air conditioning (HVAC) and lighting systems in buildings. Furthermore, the paper presents the developed IoT-based platform, as well as the implemented services. As a result, the paper illustrates how providing old existing buildings with the appropriate technology can contribute to the objective of transforming such buildings into nearly zero-energy buildings (nZEB) at a low cost.The aim of this study consists of monitoring the effect of thermal aging on the physico-chemical and optical properties of poly(ester urethane) elastomers designed as damping materials for railways. The materials were obtained by polyaddition in two stages in melt, resulting in regular structures. The structural modifications during the thermal aging of the samples were monitored using FTIR, color changes, TGA in non-isothermal and isothermal conditions, DSC and physico-mechanical measurements. The structural regularity of the rigid and flexible segments maintained the good mechanical properties of the structures up to 200 h of thermal aging at the elevated temperatures of 40 °C, 70 °C, 100 °C and 130 °C. It was observed that at 40 °C and low exposure times, changes occur mainly to the carbonyl groups of the soft segments. At higher temperatures and longer exposure times urethane groups were affected. Extended thermal aging led to significant changes in thermo-mechanical and optic