Vad Skafte (Fitzsimmons76Desai)

I simply wish to reveal you men how to do a retrofit on a Ram truck, any truck that has the projector headlights. Generally the stock projector headlight in vehicle are halogen projector headlights, for efficiency improvement, we suggest you to select a bi-xenon projector headlight or bi-led projector headlight for replacement. I usually begin by getting rid of the 8 millimeters screws, I'll typically heat up in the oven to about 200 degrees Fahrenheit and I'll like leave it in there for about 10 to 15 minutes. I'll begin at the edges of it.

I pretty much have the bottom part of the headlight, quite loose I guess considering that my truck is still new this perma-seal prior. I already have the bottoms pretty much loose, I just need to begin, I'll need to begin pulling on it after I get this edge over opened.

We got the hand lights apart, this is actually type of hard the top and bottoms are really simple and the side on the projector is relatively easy to this side closest to the high beam on this side. There's three t10 Torx screws that you're going to come apart, take those out and then release the projector. The projectors out, you will need to unplug for the low and high beam, for the stock projector.

I have the bracket installed onto the projector just four screws and 4 washers, they go right here on both sides. I'm just gon na do the leading bolts there which should be good enough to hold this in and after that I need to do is simply install it. Prior to I put everything back together when I take them downstairs make certain that they fire up. I'm probably gon na play with the low and high beam. You can explore the more info here https://www.inmods.com/

This is most likely on a scale of one to 10, in terms of how hard this is it's probably like a 7 or 8. I wouldn't suggest doing this if you do not understand how to do like experimentation, since there's a great deal of trial and error you have to do. It should be plug and play for the most part however for some reason, it's still not quite there yet. It's offered and if you are not pleased with the stock projectors, these will certainly do the trick.